The model DFI 100 is a lightweight hand-held indicator powered by a single 9 volt battery making it ideal for remote field operations. The DFI 100 features a 3 1/2 digit display and shunt calibration for quick set-up with a minimum of warm-up time. Peak hold is standard. The DFI 100 is stocked for quick delivery.
The model DFI 200 is a light weight hand-held indicator powered by a single 9 volt battery making it ideal for remote field operations. The DFI 200 features a 4 1/2 digit display max/ min recall and push-button calibration and set-up. This unit also features RS232 serial communication and selectable digital filter. The DFI 200 stores up to 3 transducer calibrations with the optional auto calibration chip which allows auto-calibration to any transducer.
The DFI 250 is powered by Sigma-Delta A/D converter, ensuring fast and accurate weight readings. It may be configured via the keypad, through the RS232 port or through IR-Link with our PC software. A function key can be configured to select units of measure (kg, lb, g, & t) hold a weight reading, display an absolute peak weight,
count parts or stabilize a moving mass i.e. livestock. To simplify operation, Key Disabling allows any or all keys to be disabled. The DFI 250 can be operated using an AC adaptor or four AA batteries that provide up to 38 hours of continuous operation.
(2) The DFI 1550 and 1650 are self calibrating microprocessor based six-digit transducer indicators. This versatile instrument will instantly self-calibrate with any Cooper transducer equipped with the "Sure Cal Signature" option. One to four independent transducer channel cards are available. Transducers previously purchased may be used by purchasing the In-Line module. Manual calibration of the DFI 1550 or DFI 1650 is done via the front panel menu. An auto-zero circuit will zero the indicator when no load or pressure is applied to the transducer. Standard outputs include RS-232 and 0-5 volt analog output.
The DFI 2000 is a process monitor and controller designed to work with a variety of sensors including: Force, torque, pressure or displacement. This unit is capable of capturing and storing multiple peaks and high speed recording of measurement profiles vs. time. Also optional simultaneous angle or RPM measurements may be recorded. The DFI 2000 has multiple sampling rates from 1 Hz to 10 KHz and storage for up to 8,000 data points. There are 3 process control output signals, high, low, and target occurrences. Cooper also offers an optional personality module, which allows the indicator to calibrate itself to the transducer. The DFI 2000 comes standard with rechargeable Ni-Cad batteries and optional user interface software.
This high speed instrument combines reasonable cost with 0.05% accuracy and 16 segment alpha numeric display. The DFI 2555 can be connected to force, pressure displacement and torque transducers built with different technologies because of the carrier frequency amplifiers which are particularly stable and insensitive to interference. Standard features include user selectable current/voltage output, peak hold, RS232, and high/low limits.
The DFI 3900 is a low cost multi-channel strain gage indicator that will accept four separate inputs, with a fifth math channel. The meter's 6 digit display, high speed measurement (20/sec. Update rate) makes this perfect for demanding applications. Standard formula includes sum, difference and product. Some of the standard features include: 4 assignable front keys, 2 assignable remote inputs, dual scale setup, net/gross, autotare, and peak and valley functions.
(2) The DFI 4215 is an intelligent microprocessor based instrument
designed for the measurement and control of strain gage
transducer based systems. The DFI 4215 fully expresses
bipolar six digit transducers. The “Auto ID” feature automatically
identifies the load cell and applies calibration specifications for cells
that incorporate “Tag ID” technology. Kits are available to adapt any
existing load cell with Tag ID.
The DFI 4215 combines force channels, encoder position channels,
print capabilities, and RS 232/485 serial communications into a
versatile platform that can be customized to deliver the most powerful
and affordable instrumentation in its class.
The DFI 4215 is compatible with most tensile ...
(4) The DFI 7000 is a low cost panel or bench mount instrument which provides signal conditioning and amplification (0-5 volt output). The 4 1/2 digit display features bright easy to read .56" characters. The compact case is ideal for panel mounting. Also available in a bench top unit. Peak hold is a standard feature and the DFI 7000 is stocked for quick delivery.
The DPI 7000 DM is a low cost panel or bench mount instrument which provides signal conditioning and amplification (0-5 volt output). The 41/2 digit display features bright easy to read .56" characters. The compact case is ideal for panel mounting. Also available in a bench top unit.
The Model DFI 9000 portable instrument features full 4 1/2 digit accuracy and is designed for use in remote field operations as a portable calibrator or digital readout device. The Model DFI 9000 is enclosed in a rugged weatherproof aluminum carrying case with peak hold feature. A shunt calibration button is standard.
The DFI INFINITY bench top or panel indicator, is a versatile six digit process controller with 1 microvolt resolution. The INFINITY can be calibrated to any 350 ohm strain gage transducer via the front panel pushbutton or the optional serial communications board. Standard features include peak and valley hold, zero tare and 4 alarm set points. Options available are duplex RS232, or RS485, analog output and BDC output.
The DPI Infinity CS indicator is a low-cost indicator/controller. Four full digits and wide scaling capability allows for display in any engineering units. A variety of DC voltage and current input ranges cover many typical process applications. A fully scalable analog output is optional. Dual setpoints, each featuring 6 amp form "C" relays, optional on each unit, allow complete alarm or control of critical processes. Digital front panel tare is included on every unit. A lockout feature prevents unauthorized changes in setup. These features are standard on the Infinity C meter.
The Cooper DFI IQ 710 is designed and built to provide superior programmability and durability, this indicator offers an array of advanced features. Utilizing a large display the DFI IQ 710 can store and display 16-character programmable user prompts, 300 truck ID numbers, or part numbers. Four programmable macro function keys enable the user to quickly and accurately complete a variety of functions. Additionally, macros can be linked to setpoints during batching operations, allowing the macro to initiate each batch setpoint. Two independent communication ports provide full EDP and programmable printer ports. Two serial ports allow remote configuration and calibration. Five-point linearization calibration ensures the highest accuracy in ...
(3) Designed to function as superbly as it looks, the BP case combines appearance and structural integrity to assure that your instruments are properly protected. Composed of modular aluminum extrusions, the BP case is available in a single meter, two meter, or three meter configuration. The standardized extrusions and aluminum panels are securely assembled and textured with a fashionable black wrinkle coating. Furthermore, the back of the BP is especially designed for easy interface with a variety of outputs. Designated casings are equipped with mounting ports for easy and secure connections for Transducers, Analog Output, BCD Output, Relay Output, and RS-232.
The DFR 2000 is a multichannel recorder/digital indicator with graphics. This is truly a complete and versatile data acquisition system. The DFR 2000 has 16 bit resolution which displays, records, computes and stores 2,4 or 6 input channels. A variety of inputs are available: voltage, current thermocouple and RTD. The DFR 2000 also provides a number of math functions, such as; +, -, x,/, logarithms, totalization, powers averages etc. All data can be stored on a 3 inch disc or PCMCIA memory cards. Optional features include: Relays, RS232/ RS485, PCMCIA card reader, windows based software, carrying case.
The DFR 1250 is a feature-rich digital recording system offering two universally configurable isolated inputs for measuring DC voltage, DC current, thermocouples, and RTDs. It also offers frequency and pulse inputs, and can be used to measure RPMs with the correct speed measurement sensor. Combining small package size with extreme flexibility make the DFR 1250 a powerful, yet economical, digital data recording system. A maximum sample storage rate of 100 samples per channel can be set for both channels, allowing capture of short-duration signal anomalies. The optional DFR 1250 Navigator software offers many convenient and intuitive features to make reviewing, printing and exporting data easy. Optional USB or Ethernet ports available for ...
Call today at 800-344-3921 and discover how our load cells, pressure transducers, pressure gages
and digital instrumentation can meet your operations needs.
Cooper Instruments & Systems
Regional Office
542 Via de la Valle-Unit F
Solana Beach, CA 92075
Phone/Fax: 858-792-5644
Headquarters
400 Belle Air Lane, P.O. Box 3048
Warrenton, VA 20188 USA
Tel: 540-349-4746 • Fax: 540-347-4755
